Search results for "3d printed"
showing 10 items of 22 documents
Miniscrew-supported distal jet versus conventional distal jet appliance: A pilot study
2019
Background Maxillary molar distalization is the most frequently used nonextraction treatment in the correction of Class II malocclusion. The use of traditional intra-oral devices shows unreliable results. Nowadays the use of miniscrew-supported appliances helps prevent anchorage loss. The aim of this pilot study is to compare the amount of upper first molar distalization and the dentoalveolar side effects using traditional distal jet appliance and miniscrew-supported distal jet appliance. Material and methods 20 patients were randomly assigned to receive a treatment with miniscrew-supported distal jet appliance (Group A) or with traditional distal jet appliance (Group B). To ensure a safe a…
Comparison of the shear bond strength of 3D printed temporary bridges materials, on different types of resin cements and surface treatment
2019
Background Thus, purpose of this study was to compare the shear bond strength of the resin cement and the resin modified glass ionomer cement on 3D printed temporary material for crowns and bridges in combination with different surface treatment modalities. Material and methods Test specimens VarseoSmile Temp material (Bego, Bremen, Germany) (n=64) in the form of rectangular blocks (n=32) and cylindrical test specimens (n=32) were printed using the Varseo S 3D printer (Bego, Bremen, Germany). The specimens were divided into 4 groups, with 8 specimens of each kind. Two groups (n=16 pairs) were blasted with Perlablast® Micro [PM] 50µm (Bego, Bremen, Germany) and two groups (n=16 pairs) were b…
Determination of mercury at picogram level in natural waters with inductively coupled plasma mass spectrometry by using 3D printed metal scavengers
2019
The determination of ultra-trace concentrations of Hg in natural water samples via preconcentration using 3D printed metal scavenger technique followed by inductively coupled plasma mass spectrometry (ICP-MS) was developed. The determination of Hg in certified reference material ERM-CA615 (groundwater) was performed with high accuracy and precision resulting in recovery of 100 ± 3% and RSD <2.5%, respectively. Selective laser sintering (SLS) 3D printing was used to fabricate the scavengers using a mixture of polyamide-12 powder with thiol-functionalized silica. The preconcentration procedure is based on the adsorption of Hg on the scavenger and followed by elution of the preconcentrated Hg …
Shear force comparative evaluation for surface treated and non- treated 3D interim printed materials with different types of glass-ionomer cements
2020
Background The purpose of this investigation was to compare shear force of different glass-ionomer cements on 3D printed interim material in combination with and without surface pretreatment. Material and Methods 120 rectangular specimens made of printable provisional material (Bego, Bremen, Germany) were used. After post-processing the specimens were blasted with aluminum oxide 110µm (Bego, Bremen, Germany). Extra 120 non-surface treated specimens were used as an experimental negative test group. All 240 specimens were divided randomly into 6 groups. All were cemented with a compressive load of 20 N using universal testing machine Z010 (Zwick/Roell, Ulm, Germany) to ensure a comparable cem…
ATR-Spin: an open-source 3D printed device for direct cytocentrifugation onto attenuated total reflectance crystals.
2021
Infrared Spectroscopy (IR) enables the direct and rapid characterization of cells at the molecular level. Achieving a rapid and consistent cell preparation is critical for the development of Point-of-Care diagnostics for cell analysis. Here we introduce an open-source, 3D printed device for integrating the isolation, preconcentration, and measurement of attenuated total reflectance IR spectra of cells from biofluids. The tool comprises a disposable card for cytocentrifugation, equipped with magnets, which allows reproducible integration into the pathlength of the IR spectrophotometer. Preliminary results using cell media containing A459 cells indicate that this system enables a qualitative …
3D-Printed Products for Topical Skin Applications: From Personalized Dressings to Drug Delivery.
2021
3D printing has been widely used for the personalization of therapies and on-demand production of complex pharmaceutical forms. Recently, 3D printing has been explored as a tool for the development of topical dosage forms and wound dressings. Thus, this review aims to present advances related to the use of 3D printing for the development of pharmaceutical and biomedical products for topical skin applications, covering plain dressing and products for the delivery of active ingredients to the skin. Based on the data acquired, the important growth in the number of publications over the last years confirms its interest. The semisolid extrusion technique has been the most reported one, probably …
Biomechanics of human ascending aorta and aneurysm rupture risk assessment
2021
Ascending aortic aneurysms (AsAA) and aortic dissections are life-threatening cardiovascular diseases. The main criteria for determining surgical intervention of AsAA are the maximum diameter or the increasing annual rate of the aneurysm. The mortality of the untreated aortic dissection can be 21% to 74%, depending on the delay of hospital admission.Our study aims to characterize the biomechanical properties of the ascending aorta and propose a patient-specific approach to assess the risks of rupture. The purpose of this PhD work is multifold.On the one hand, biaxial tensile tests were performed on AsAA samples obtained from one hundred patients with surgery of AsAA. The impact on the diffe…
"3D Printed Complexed Arota as A Preoperative Guidance and Postoperative Results’ Evaluation"
2021
We describe a case of 55 years old female who underwent an aortic valve replacement using a mechanical valve...
Improving High Frequency Transformers behavior for DC-DC Converter Used in Electric Vehicles
2018
The paper presents a design procedure for high frequency transformer windings adopted in the DC-DC converter used in electric vehicles. The output of the design procedure is the integration of a 3D printed plastic case in the transformer windings, with the aim to maximize the output power. The proposal design procedure is entirely based on a finite element analysis approach and on a differential evolution algorithm used for the solution of the optimization problem.
Study Regarding the Optimal Milling Parameters for Finishing 3D Printed Parts from ABS and PLA Materials
2018
Abstract In this paper we proposed to identify the optimum milling parameter required for finishing processes performed on 3Dprinted parts from ABS and PLA materials. We have identified the optimum milling parameters for a constant spindle speed of 3500 rot/min for face milling and profile contouring operations with different tools diameters. The study was performed on 3D printed specimens from ABS and PLA materials.